Clean a Brother inkjet's print head through Print Head Cleaning, without removing or wiping the head. Identify missing colors on its quality check sheet, run the cleaning option for those colors, then compare a second sheet.
The controls vary by model. Touchscreen printers and printers with buttons can put the same cleaning task in different menus, so match the instructions to the model printed on your printer.
In this guide
Match the cleaning controls to your Brother model
Read your printer's full model code, including all the letters at the end. The examples here cover MFC-J491DW/J497DW button models and MFC-J690DW/J895DW touchscreen models. Other Brother inkjets may use different menus or cleaning options.
Open your model's Online User's Guide if its screen doesn't match. Look under Routine Maintenance, then Clean Your Brother Machine or Improve Print Quality. Choose the print-head procedure, not scanner-glass or roller cleaning.

Brother says its print-head cleaning manual gives separate procedures for those two model groups. It also warns against touching the print head, which can cause permanent damage.
This procedure is for inkjets using liquid ink. A Brother laser printer using toner and a drum needs its own print-quality maintenance. The Brother drum guide explains that separate part and its replacement counter.
Print a quality check and identify the missing color
Load the paper required by your model and start its print-quality check from the control panel. The printer produces its own pattern, so you can check how well it prints without a particular document or app affecting the result.
On MFC-J690DW/J895DW, press Settings > Maintenance > Improve Print Quality > Check Print Quality, then Start. The printer produces a Print Quality Check Sheet with four color blocks.
On MFC-J491DW/J497DW, press Settings and navigate with the selection buttons to General Setup, then OK. Select Maintenance > OK > Impr. PrintQuality > OK > Impr. PrintQuality > OK, then press the right-hand selection button.
Check each block for missing lines. A broken black pattern calls for black cleaning; a problem in cyan, magenta, or yellow calls for color cleaning. Keep this sheet so you can check whether those missing lines return after cleaning.
The screen asks about print quality. Choose No when all lines are clear, or Yes when lines are missing. Read the question carefully: answering Yes just because the sheet printed can start steps you don't need.
For each color, choose the closest displayed pattern, numbered 1 to 4. Follow the cleaning request if one appears. If the screen returns to Maintenance without that request, the printer isn't asking for a cleaning cycle yet.
Run cleaning from the touchscreen
On MFC-J690DW/J895DW, press Settings > Maintenance > Print Head Cleaning. Choose Black only, Color only, or All, according to the pattern you checked. Color only treats the three color inks together.
Choose the cleaning strength: Normal, Strong, or Strongest. Start with Normal for the first routine attempt, then press Start. Use stronger options according to your model's instructions if the ordinary clean doesn't improve the pattern.
The printer cleans the head internally, so leave it closed while it works. Wait for the cleaning to finish before printing another check sheet or sending a document.
If your model offers fewer options, use the controls it actually shows. Not every Brother printer offers all three cleaning strengths shown in this example. A missing Strongest button isn't itself a printer fault.
Use Settings and OK on button-operated models
On MFC-J491DW/J497DW, press Settings. Select General Setup and press OK, select Maintenance and press OK, then choose Print Head Cleaning and press OK.
Select Black only, Color only, or All and confirm with OK. Choose Normal, Strong, or Strongest, press OK, and press the right-hand selection button to begin cleaning.
On these models, use the selection buttons and confirm with OK instead of tapping a touchscreen. Read the displayed choice each time. Follow the button-model menu so you aren't searching for a touchscreen control your printer doesn't have.
If the printer reports an ink or maintenance error instead of starting, note the displayed error and look up its instructions in your model's guide. Pressing start again won't fix an error that's stopping the cleaning cycle.
Compare the next check sheet before repeating maintenance
After a guided cleaning, the printer asks whether to check quality again. Choose Yes, then start the new sheet when prompted. If you started cleaning through the maintenance menu, return to the print-quality check and print a second sheet.

Check the new pattern for the color that had gaps. Complete lines mean the cleaning has helped. A different document looking darker on different paper tells you less, because both the paper and the document have changed.
I'd keep the first sheet beside the second until this is resolved. It's easy to forget which color had gaps, and those sheets let you describe the problem accurately if a cartridge change or service call comes next.
Each clean uses ink; use it when the pattern shows a print-quality problem. The general print-head maintenance guide covers cycle costs. For repeat attempts, use your Brother model's instructions.
If PC documents print poorly despite a complete pattern, check paper and document settings. The model's Windows Printing Preferences include media type and print quality. If an app can't reach the printer, use the Brother connection checks.
Replace the problem ink or ask for a repair assessment
For these example models, the manual's next step after unsuccessful cleaning is a new genuine Brother ink cartridge for each problem color, then clean again. Check that the replacement ink code is listed for your model before buying.
Use the check sheets to identify the cartridge to replace. One missing color doesn't require buying a complete set. Follow your model's instructions for fitting the cartridge. Judge the result with a fresh quality pattern.
For continued missing lines, ask Brother Customer Service about service for your model and region. Explain that cleaning and replacement ink didn't resolve the gaps. Provide the model, ink details, and comparison sheets.
Tell support whether the printer's own pattern has gaps, not just that a document looks poor. The printer's own pattern shows support how it prints without a PC or app involved. They can use that result to decide about inspection or repair.
The Short Version
Print a check sheet, select the affected ink group, and run the model's cleaning command. Compare a new pattern afterward. Use its cartridge or service instructions if gaps remain; leave the print head untouched.
Checked November 16, 2026.







