How to Fill the Ink Tanks on an Epson ET-2980

An Epson ET-2980 takes bottled ink through its color-matched tank ports. Start with Maintenance > Fill Ink, fill to the upper line without squeezing the bottle, then reset the level for only the colors you refilled.

The display estimates ink use rather than measuring the liquid directly. That makes the final reset part of the refill, not an optional way to hide a warning while leaving a tank empty.

Check the bottles and the actual tank levels

Read the ET-2980 model name before opening a bottle. The U.S. and Canadian guide lists 502-series supplies: black 502120, cyan 502220, magenta 502320, and yellow 502420.

Use the bottles listed for the region where your printer was sold. A bottle that resembles the old one isn't enough; match the printer and color to the listed supply before opening it.

The ET-2980 ink part numbers also list a maintenance box, but that is a separate replacement item. It isn't the bottle used to top up the tanks.

Diagram showing the ET-2980 refill sequence: Fill Ink, match the color, fill to the upper line, then reset that color

Look through the tank windows and compare the liquid with the marked lines. Refill before a level drops past the lower line. Continued use with ink under that line can damage the printer.

Epson's ET-2980 refill procedure explains why the physical check matters: its low-ink alert is calculated from ink use, so an incorrect refill or reset can make the alert inaccurate.

Start Fill Ink and open the correct port

Put the printer on a level surface with room to work. Have the bottles and a damp towel within reach before starting. I'd prepare the work area first so an open bottle never needs to be balanced beside the printer.

  1. Turn the printer on.
  2. Select Maintenance > Fill Ink on the control panel.
  3. Read the screen's safety and usage instructions, then press OK.
  4. Close the document cover if it is open.
  5. Open the ink-tank cover and the cap for the color you're refilling.

Match the bottle to the color-coded label on the tank unit. Open that tank's cap, rather than guessing from the bottle's position on the desk.

Keep the bottle upright while slowly removing its cap. Don't shake or squeeze it. Ink flows through the correct port without you pressing on the bottle.

This is a bottle refill, not a cartridge change. You don't need to pull a cartridge from the moving printhead holder or open the maintenance-box compartment to add ink.

For a different Epson that uses replaceable cartridges, use its own cartridge instructions. Cartridge instructions don't identify the EcoTank filling ports, so keep the two ink systems separate.

Let the bottle fill the tank without force

Find the upper fill line on the tank before inserting the bottle. It's the stopping point you need to watch, especially if the electronic warning doesn't agree with what you can see.

Position the top of the bottle over the matching filling port and insert it straight. The bottle openings are keyed for their colors. If it doesn't fit, check the color and orientation instead of forcing it.

Wait while ink flows into the tank. It should stop automatically when the ink reaches the upper line. Keep watching the tank while it fills.

If ink doesn't flow and the tank isn't full, lift the bottle and insert it again. Once ink has reached the upper line, don't remove and reinsert the bottle to force more in; that can cause a leak.

The printer can work when a tank isn't completely full, but filling to the top line and resetting afterward keeps the level tracking as intended. The displayed estimate only makes sense when the refill matches the reset.

When the tank is full, remove the bottle. Replace its cap securely and store any remaining ink upright for later use. Don't leave the bottle standing in the filling port.

Close the tanks and update the refilled colors

Securely close the cap on the tank you filled. Repeat the process for any other color that needs ink, matching each bottle to its own port.

Close the ink-tank cover. Use both hands to close the scanner unit in the order shown in the guide. Its slow-closing mechanism can offer some resistance, so close it carefully rather than letting it fall.

Press the Start button and follow the display's instructions to reset the ink levels. Select the colors that were actually refilled. A color you didn't fill shouldn't be reported as newly full.

Check the tank windows once more against the colors chosen on screen. If you selected the wrong color, follow the model's refill instructions to correct the reset before more printing changes the estimate.

If the warning names a maintenance box instead of an ink level, stop repeating the refill. That message concerns collected waste ink and needs the box procedure, even when every supply tank is full.

Check the next page and follow a remaining fault

Print a small document after the refill and reset finish. If it prints normally and the display accepts the level update, the refill is complete. Adding ink alone is no reason to start a long cleaning routine.

For missing colors or gaps, use the ET-2980's nozzle-check procedure to see which pattern is affected. A full tank alone doesn't show whether the printhead is delivering every color onto the paper.

The ET-2850 printing guide explains how to separate a job that never prints from one with poor output. Keep the ET-2980's own menu instructions for any maintenance you then perform.

If a job stays in the computer's queue, check the Epson Wi-Fi connection separately. Refilling the tanks won't reconnect an offline printer.

If you added the wrong color, find a leak, or still see a warning after resetting, contact Epson Support. Give the ET-2980 model, bottle number, color, and exact message. Ask for ink-system recovery instructions before printing more.

The Short Version

Use Maintenance > Fill Ink, match each bottle to its tank, and let ink stop at the upper line. Close the caps and covers, then reset only the refilled colors. Read the tank windows as well as the display's calculated estimate.

Checked November 16, 2026.

Written by Isaac Smith

Isaac Smith is the founder and editor of PC Glance, a website that covers computers, laptops, and technology. He is a tech enthusiast and a computer geek who loves to share his insights and help his readers make smart choices when buying tech gadgets or laptops. He is always curious and updated about the latest tech trends.

More from Isaac Smith

Leave a Comment