An Epson refill doesn't clear a low-ink warning until you reset its ink estimate. Check the tank, then reset the colors you filled. Blank output needs a nozzle check and the model's print-head cleaning routine.
These are separate problems. A full tank with an unchanged display needs its counter updated. A printer that accepts the refill but prints badly needs its ink flow checked. A refilled cartridge needs a different set of steps.
In this guide
1. Match the fault to the kind of ink supply
Look at the printer's model label and its ink compartment. EcoTank models have tanks filled from bottles. Cartridge models take removable ink cartridges, so an EcoTank reset sequence doesn't apply to them.
Read the printer's exact message before changing anything. A refill reminder, a cartridge recognition error and a maintenance error aren't interchangeable. Refilling a tank won't clear a paper jam or a waste-ink service message.

For a cartridge model reporting that an ink cartridge isn't recognized, use the Epson cartridge reseating procedure. Adding ink doesn't turn an incompatible cartridge into a recognized one.
On an EcoTank, compare the visible liquid with the marks on each tank. The display is an estimate of use, so it can disagree with the liquid. Check the actual ink level before resetting the estimate.
I'd sort out the warning before sending another large print job. That way, you won't confuse an ink-supply problem with a document or computer setting.
2. Finish the refill before resetting its counter
Fill the affected tank to the upper line using the bottle specified for your model. Select every color you actually refilled when the printer asks which levels to reset. A reset for black doesn't update cyan, magenta or yellow.
Epson's post-refill instructions explain that the alert system estimates remaining ink from use rather than directly measuring the liquid. Resetting tells that system the refill is complete.
Don't reset an empty or partly filled tank as full. That makes the estimate inaccurate and can allow printing with too little ink. Continued use with ink under the lower tank mark can damage the printer.
For the ET-2980's physical filling process, follow the model's bottle and tank procedure. Its Fill Ink control differs from the ET-2720 sequence in the next section.
Close the tank caps and covers as your model's instructions describe. Once the physical refill is finished, move to the control-panel confirmation. Pouring ink and updating the display are two parts of the same job.
3. Use the reset sequence for your Epson model
On an ET-2720, press Home if needed. Use the left or right button to select Maintenance > Reset Ink Level, then press Start. Follow the display to select and reset each tank you filled.
The ET-2720's reset instructions give that sequence. Wait for the completion message instead of leaving the menu after choosing the first color.
Other supported display models can show Maintenance > Reset Ink Levels > Next, followed by the refilled colors, Reset, and OK. Use that sequence if your display offers these controls.

A different menu isn't a reason to guess at button holds. Open your exact model's User's Guide and check its reset instructions. An LCD model's button sequence doesn't apply to every EcoTank.
Some newer touchscreen models ask which colors were refilled as soon as the tank cover closes. Complete that prompt when it appears; those models don't need a separate reset menu.
Basic button-and-light models without an ink counter need a visual tank check instead. If an error light stays on, follow your model's error instructions rather than an LCD printer's reset sequence.
Check the displayed levels after completion. If the selected colors update and the refill reminder clears, the counter reset has worked. If the same warning remains, record its wording and confirm that all refilled colors were selected.
4. Check the nozzle pattern when ink still won't print
A cleared warning doesn't clean the print head. If pages are blank, faint or missing a color, run the printer's nozzle check from its maintenance controls. That maintenance pattern doesn't use your computer file.
Look for missing pieces in the pattern. A complete pattern suggests the nozzles aren't clogged. When that built-in pattern is correct but a computer document fails, check the job's color and paper settings instead of repeating cleaning.
For an ET-2720 with gaps, load plain paper, choose Maintenance > Head Cleaning, press OK, then Start. Leave the printer powered on and its inner cover closed while cleaning runs.
When the cycle finishes, the flashing power light becomes steady. Select Nozzle Check, press OK, then Start to see whether the pattern improved. Compare the printed gaps rather than judging only the tank display.
On this model, if the pattern hasn't improved after up to three ordinary cleaning cycles, turn it off and wait at least 12 hours. Then check the nozzles and follow the model's next cleaning instruction.
5. Reserve Power Cleaning for severe missing patterns
For the ET-2720, Power Cleaning may be needed if the nozzle pattern is mostly or entirely missing. The same option can follow ordinary cleaning that hasn't restored the pattern. It uses a different procedure from a level reset.
First check that all four tanks reach the one-third mark or higher. Too little ink during this cycle risks printer damage. Adding ink to just the missing color isn't enough if another tank is short.
Turn the ET-2720 off. Hold Power + Help together until its Power Cleaning screen appears, then follow the display. Run a nozzle check afterward to compare the result.
Before another Power Cleaning, switch it off for a minimum of 12 hours. For another Epson model, check its manual before using these ET-2720 steps and limits.
If repeated model-approved cleaning still leaves blank or broken patterns, ask Epson support to check for an ink-delivery or print-head fault. Give them the model, refill bottle number, warning text and the latest nozzle pattern.
If the nozzle pattern is complete and printing fails only from Windows, use the Windows printing checks. At that point, check the queue and connection.
The Short Version
Match the refill to the tank and model, then update only the refilled colors. A lingering warning needs the correct counter reset; blank output needs a nozzle check. Use the model's cleaning limits and take a failed pattern to support.
Checked November 16, 2026.







