Connect AirPods With Bluetooth: Any Device

AirPods become available for Bluetooth pairing when their light flashes white. Start pairing with your model's case or headphone control, then select AirPods on that phone or computer. The correct control depends on the generation.

An iPhone can show a setup card automatically. Android, Windows and a Mac being paired manually need their Bluetooth device list. After pairing, select AirPods as the sound output if audio stays on the device's speakers.

Make the white pairing light flash

Place the two earbuds inside their case, leaving its lid open. Put the case next to the device you're connecting. Start with enough charge for the AirPods and case to operate.

For AirPods 1, 2 and 3, plus Pro 1 and Pro 2, use the rear button marked for setup. Hold it roughly five seconds and release when white flashes appear.

For AirPods 4 and 5, plus Pro 3, double-tap the front of the open case with the earbuds inside. The white flashing light is the signal to look for them on the other device.

For AirPods Max, press the listening mode control and hold it for roughly five seconds. Let go once you see white flashes. For pairing, hold this control on its own rather than both headphone controls together.

Diagram showing the three AirPods pairing controls: back setup button, front double-tap and AirPods Max listening mode button

Apple says to use the control for your model in its manual Bluetooth pairing steps. Opening an older case without holding its button isn't enough for manual Bluetooth discovery.

If your model has no rear button, don't keep searching for one under the hinge. Double-tap the front and watch the light before moving to the Bluetooth list.

Connect to an iPhone or iPad

On iPhone, go to Settings > Bluetooth and turn Bluetooth on. Open the earbud case near your iPhone after returning to the Home Screen. Watch for the phone's setup animation.

Tap Connect, follow the displayed setup instructions and tap Done. If no card appears, activate pairing so the case light flashes white, then select their name in Settings > Bluetooth.

On iPad, open Settings > Bluetooth and select your AirPods when they appear in the device list. Keep the open case close while the device is searching.

Software requirements depend on the earbuds. AirPods 4 need iOS 18 or later, AirPods Pro 3 need iOS 26 or later, and AirPods 5 need iOS 27. Update the iPhone if its version doesn't support the model you're setting up.

When supported devices share the same Apple Account, setting up your AirPods can make them available on those devices too. You'll still need to pair them manually with a separate Windows PC or Android phone.

For used AirPods linked to another person's Apple Account, ask that person to remove them from their account. A flashing Bluetooth light doesn't remove the AirPods from someone else's Find My account.

Pair with an Android phone

Open the phone's Bluetooth settings and turn Bluetooth on. On Samsung, use Settings > Connections > Bluetooth. A Pixel uses Settings > Connected devices > Pair new device to search for accessories.

Use your case's or headphones' pairing control and check for white flashes. Select your AirPods in the available-device list, then accept the pairing prompt if Android shows one.

Wait until the phone reports that the AirPods are connected, then start a brief recording or song. Adjust media volume during playback, rather than changing only the ringtone volume.

AirPods work as a Bluetooth headset on non-Apple devices, so you can listen and talk. Siri isn't available through this connection. Pairing doesn't give Android all the AirPods settings shown on an iPhone.

If you're actually connecting to a Chromebook, the Chromebook pairing steps use its shelf Bluetooth menu rather than Android's Settings app.

Use Windows Add Device to find the headphones

On Windows 11, open Settings > Bluetooth & devices, switch Bluetooth on, then choose Add device > Bluetooth. Put the AirPods into white-light pairing mode and select their name.

On Windows 10, open Settings > Devices > Bluetooth & other devices. Turn Bluetooth on, choose Add Bluetooth or other device > Bluetooth, then select the discoverable AirPods and finish with Done.

The Windows Bluetooth pairing instructions also cover the current quick-settings route. Your PC needs working Bluetooth hardware to find the headphones.

Diagram of AirPods manual pairing paths on Windows 11, Windows 10, Mac and Android

Once connected, choose the AirPods in Settings > System > Sound as the playback output. The connection and sound destination are separate settings, so check both if the laptop's speakers keep playing.

If Windows doesn't offer a usable Bluetooth switch, check the PC first. Repeating the AirPods case steps won't add Bluetooth hardware to your PC or fix its driver.

Choose AirPods on a Mac

Open Apple menu > System Settings > Bluetooth and turn Bluetooth on. Activate pairing on the AirPods, wait for white flashes, then click Connect beside them in the Nearby Devices list.

On an older Mac that has System Preferences, open System Preferences > Bluetooth instead and connect from that device list. Use the case control that matches your AirPods model.

If sound stays on the Mac, open Control Center > Sound and select AirPods. Make sure you're changing output to the earbuds rather than selecting the Mac microphone in a separate app.

Full Mac support also depends on model and software. AirPods 4 require macOS Sequoia or later, AirPods Pro 3 require macOS Tahoe or later, and AirPods 5 require macOS Golden Gate or later.

I'd confirm one short clip plays before opening a meeting. You'll hear whether the connection and playback output are working before the meeting starts.

When the AirPods name never appears

Check that Bluetooth is on for the device you're connecting, the AirPods are charged and their light is flashing white. Keep the case open while searching. An amber or steady light isn't the same pairing signal.

For AirPods Max specifically, the Max connection checks explain how the pairing button differs from the two-control restart and reset actions.

If your AirPods don't appear on another Bluetooth device either, use the connection-help link in the pairing support page and ask for help with pairing mode or charging. Give the exact model and the light behavior.

The Short Version

Activate your model's pairing control and look for white flashes. Choose AirPods in Bluetooth, or follow the iPhone setup card. Connected headphones still need to be selected as the playback output if sound stays elsewhere.

Checked November 16, 2026.

Written by Isaac Smith

Isaac Smith is the founder and editor of PC Glance, a website that covers computers, laptops, and technology. He is a tech enthusiast and a computer geek who loves to share his insights and help his readers make smart choices when buying tech gadgets or laptops. He is always curious and updated about the latest tech trends.

More from Isaac Smith

Leave a Comment